F605-Epoxy Primer

Original
price: Negotiable
minimum:
Total supply:
Delivery term: The date of payment from buyers deliver within days
seat: Beijing
Validity to: Long-term effective
Last update: 2017-12-11 08:16
Browse the number: 64
inquiry
Company Profile
 
 
Product details
MARSIDE Series
Product Name/Model:F605-Epoxy Primer

Characteristic: Good fillibility, easy sanding, give excellent rust proofing for bare metal, good
adhesion power to steel, aluminium, galvanized steel and stainless steel, excellent chemical
corrosion resistance and rust resistance.
Substrates Dried and sanded existing finishes, steel, aluminium, stainless steel, galvanized
steel, glass fiber reinforced plastic.
Surface Cleaning Wash by warm soap, remove wax, silicon and other contaminations with
degreaser, sanding with P800-P1000, wash with clean water then keep dry;
again with degreaser.
Mixing Ratio F605 Epoxy Primer MSH105 Epoxy Hardener MSD-63 Epoxy Thinner
4 1 1~2
<30℃  F605 Epoxy Primer MSH105 Epoxy Hardener MSD-63 Epoxy Thinner
Spray Viscosity 16-19s to drop off, in 4# viscosity cup at 25°C,
Pot-life   At 20°C, 3 hours with hardener.
ReTreatment Sanded with P600 or P800 sand paper, do following construction after drying
Spray Gun Set Up Gravity Feed: 1.2-1.5mm 4-5kg/cm 2
Suction Feed: 1.4-1.6mm 4-5kg/cm 2
Spray Technology Coats&Thickness: 2-3 coats, total 25-35um.
Flash-Off Time: At 25°C, 5-10 minutes between two coats, it depends on
temperature and paint film.
Drying Time A. Allow 10-20 minutes air-drying,then 60°C baking 30 minutes, can sand after
cool down.
B. Air-drying time 3 hours, at 20°C.
Shelf Life 2 years in original sealed can, cool and dry place at 25℃.
Package 1L×12 or 3.75L×4
Note:
1. The substrate must be cleaned and sanded before spray, wet sanding P800-1000 and then dry.
2. At ambient temperature higher than 30℃, add appropriate Retarder Solvent into thinner to
avoid blushing. For more details, please refer to technical data sheet of Retarder Solvent.
3. The products mixed with hardener should be used up soon and can not be restore for future use;
clean equipments immediately with thinner after application, otherwise it is very difficult to be
cleaned after dry.
Total0bar [View All]  Related Comments
 
more»Other products

[ Products search ] [ favorites ] [ Tell friends ] [ Print ] [ Close ]